How to configure campaigns for Communication Server

Use Management Portal to configure campaign attributes depending on the campaign scenario.

The following configuration tables display the configurations specific to Communication Server for the supported campaign scenarios:

  • Extensions: Agent campaigns with remote extensions on Communication Server.
  • IVR: IVR campaigns with Communication Server.

To configure Altitude for the supported campaign scenarios, use the following table to retrieve the required configuration data from the Communication Server.

Communication Server configuration

Extensions

IVR

External extension numbers

Required

-

IVR extension numbers

-

Required

Hunt group number

-

For inbound

Queued routing point number

For inbound

 

DNIS or DID/DDI

For inbound

For inbound

Prefix of outbound rule for agent delivery

For predictive

-

Altitude telephony gateway

On the Altitude telephony gateway, configure the following:

  • The IP address and CSTA server port of the Communication Server.
  • Agent and IVR extensions.
  • Queued routing points, if needed for agent campaigns.
  • Call classifiers, if needed for predictive dial over remote extensions.

The Altitude telephony gateway does not use virtual extensions, routing points, or call classifiers.

Agent extensions

Extensions

IVR

From, To

External extension numbers

IVR extension numbers

Extension type

Digital

Digital

Routing points

Extensions

IVR

From, To

Queued routing point number

-

Type

Queued

-

Synchronize voice data

Disable

-

Call classifiers

Extensions

IVR

Address

TCP/IP address of Communication Server

-

Device

Call classifier device number

-

Dialing prefix

Blank

-

ANI prefix

Blank

-

Agents

Configure Altitude agents to work on agent campaigns and IVR campaigns as follows:

Properties

Extensions

IVR

Default extension

Optional

IVR extension numbers

Switch agent ID

Blank

Blank

Campaign telephony gateways

Configure an Altitude campaign telephony gateway for each campaign that handles calls on the Communication Server.

Inbound

Extensions

IVR

DNIS (for inbound)

DNIS or DID/DDI

DNIS or DID/DDI

Mapping group (for inbound)

Blank

Blank

Monitored devices

Empty

Hunt group